junction size: square 155 mils wafer size: 4" v rrm class: 1200 v passivation process: glassivated mesa reference ir packaged part: 16tts series phase control thyristors IR155BG12DCB major ratings and characteristics parameters units test conditions v tm maximum on-state voltage 1.4 v t j = 25c, i t = 10 a v rrm reverse breakdown voltage 1200 v t j = 25c, i rrm = 100 a ( 1 ) i gt max. required dc gate current to trigger 60 ma t j = 25 c, anode supply = 6 v, resistive load v gt max. required dc gate voltage to trigger 2 v t j = 25 c, anode supply = 6 v, resistive load i h holding current range 5 to 100 ma anode supply = 6 v, resistive load i l maximum latching current 200 ma anode supply = 6 v, resistive load mechanical characteristics nominal back metal composition, thickness cr - ni - ag (1 ka - 4 ka - 6 ka) nominal front metal composition, thickness 100% al, (20m) chip dimensions 155 x 155 mils (see drawing) wafer diameter 100 mm, with std. <110> flat wafer thickness 350 m 10 m maximum width of sawing line 130 m reject ink dot size 0.25 mm diameter minimum ink dot location see drawing recommended storage environment storage in original container, in dessicated nitrogen, with no contamination bulletin i0213j 12/01 (1) nitrogen flow on die edge. www.vishay.com 1 document number: 93824
IR155BG12DCB ir 155 b g 12 d cb 1 2 3 1 - international rectifier device 2 - chip dimension in mils 3 - type of device: b = wire bondable scr 4 - passivation process: g = glassivated mesa 5 - voltage code: code x 100 = v rrm 6 - metallization: d = silver (anode) - aluminium (cathode) 7 - cb = probed uncut die (wafer in box) none = probed die in chip carrier device code ordering information table 5 outline table 7 6 all dimensions are in millimeters bulletin i0213j 12/01 4 www.vishay.com 2 document number: 93824
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
